Can you refill xerox toner cartridges

A burn tool come standard in all refill kits for cartridges without factory-made fill holes, and can also be purchased separately on our accessory page. Second, fill the cartridge with the right toner.

Once you have the hole you use it to 'pour' toner into the cartridge's toner hopper Figure 3. The toner which comes with our refill kits is manufactured specifically for the cartridge it was ordered for - we don't have 'generic' or 'universal' toner.

Your kit comes with a funnel cap which screws on top of the toner bottle and you use this to add toner to the cartridge without any mess. You don't want to shake or squeeze the bottle because this can spray toner powder all over the place. Just press the funnel cap gently against the fill hole and gently tap the side of the toner bottle until the bottle is empty. Third, reseal the fill hole The last step is to reseal the fill hole. If your cartridge had a pre-made fill hole you simply reinsert the plastic plug that you removed earlier.

Refill kits for cartridges where you have to burn a fill hole come with our special aluminum tape, which you use to securely tape over the hole Figure 4.

Gently shake the cartridge to evenly distribute the toner and reinsert into your printer - it's that easy! Xerox Toner Refill. Our toner refill kits give you this option. You can refill and reuse your empty toner cartridge and save lots of money!.

Xerox sell a wide range of printers and photocopiers and the cartridge design's tend to vary widely between the different printer models - Zinetic are experts in Xerox toner refills. We have developed refill products and instructions for every Xerox laser printer in common use. We buy the printers, we refill the cartridges, we test them repeatedly - all before we sell a refill kit.

How do I refill my Xerox toner cartridge? Refilling Xerox toner cartridges is simple and straight forward. This is usually quite simple, though you may need to press a release button or move a lever that normally keeps it in place.

You should also be careful of any toner on the outside of the cartridge, as it can easily stain your clothes and the area around your printer. Some toner cartridges are designed to be easily refilled, often having holes in them into which toner can be poured.

These holes are usually clearly visible on the cartridge and typically have a stopper or plug that you can remove. Refill kits provide toner in small bottles that include funnels or narrow tips, making it easy for you to place the tip into the refill hole without spilling it.

The toner itself is powder so fine that it moves much like a liquid, and it can easily be poured into the cartridge. There are also toner cartridges that do not have refill holes in them, since they are not designed to be refilled, only replaced. You may be able to create a hole in such a cartridge by using a hot object to melt its plastic case.

Some refill kits suggest that you do this, but you should be very careful about doing so.